SubscribeLow intensity ‘LED’ group A omni-directional light for use in low illuminance backgrounds. Can also be used as a multi-purpose long life light in access restricted areas.
The OL600 has an objective LED life exceeding 60,000 hours. Life over 65,000 hours has been recorded.
The light element is constructed from three hundred LED's (light emitting diodes) each mounted on a serviceable printed circuit board. Each printed circuit board operates independently to reduce the possibility of total blackout.
Available in many voltage and power configurations from 12VDC to 415VAC. Battery and fully stand-alone versions available complete with photoelectric control.
OL600 Technical Information
Complies to BS 3224 Part 6 (Obstacle Lights) - ICAO Annex 14
- CAA CAP 168
- Weather protection to IP54
- Radio interference suppression to BS 800
- Vibration checking to 100Hz
- Ambient temperatures from -20° to +70°
- Light element utilizing LEDS (light emitting diodes)
- Objective element life in excess of 60,000 hours
- Maximum light output 50 candela (10 candela min)
- Very low power from 6 Watts
- Can be operated from many power sources, wind, solar, battery and mains electric.
Construction
The base unit which houses the power supply circuit is manufactured from IMPAX 7000 and has a high resistance to most mineral oils, greases, salt solutions, alcohol's, glycol's, aliphatic hydrocarbons and acids. The polycarbonate dome has high impact resistance with a unique retaining mechanism allowing it to be raised during element replacement and maintenance.
Dimensions
320mm High
212mm Wide
Weight 3.04 kg
Options
Photocell
Solar powered
Circuit to increase light output
Universal mounting brackets
Voltage
110/240V 50/60Hz
48/24/12VDC
Installation
3 No. mounting bosses
M10 x 1.5 tapped holes on 76mm pcd.
Spares available for all components relating to the OL600
This unit carries a full 12 months warranty and 24 months for the light assembly from date of purchase
