The Orga L350-xxx medium intensity red flashing or steady burning obstacle light complies with FAA type L864 and ICAO Annex 14 Vol.1, Fourth edition - July 2004, Chapter 6 medium intensity type B or type C.
Application
Marking of aviation hazards, typically structures such as communication towers, broadcast antennas, electricity transmission and distribution towers, chimneys, bridges, wind turbines and tall buildings.
Technical data / Characteristics
Operating voltage: 100-240 Vac (±10 %), 50-60 Hz- Power consumption: <35 W continuous @20 fpm during nighttime, <55 W continuous in steady burning mode during nighttime *additional information as per datasheet (see link on this page)
- Control: Internal microprocessor based controller for power management, flash character, daylight on/off and failure alarm control
- Alarms: Volt free dry alarm relay contact (2 A) for lamp failure. Further alarms and status information via CIP control unit
- Sunswitch (photocell): Internal photocell fitted in the light fixture for automatic day/night control
- Light source: Orga proprietary optical technology in combination with high performance LED's including a 5 year warranty
- Lensdiameter / colour: Ø300 mm UV resistant clear dome
- Divergence (beam angle): Minimum 3 degrees vertical
- Effective intensity: 2000 cd red ±25 %, set to operate at night time
- Flash character: 20 fpm or steady burning
- Operating temperature: -55 °C to +55 °C, 95 % relative humidity
- Ingress protection: IP65
Features
- High reliability with five year conditional warranty
- Used as single light or in multiple light systems
- Advanced communication facilities in multiple light systems
- Light weight, omni-directional lights
- Very high optical efficiency resulting in low power consumption comparing to equivalent products
- Low cost cabling scheme
- Over voltage protection devices to protect against lightning discharges
Certificates
- FAA AC150/5345-43E
Additional information
- Datasheet L350-xxx 240306 revD.doc
Datasheet - L350-XXX-Model.pdf
Drawing - EG045 L350_R01 (BT-A).PDF
EC declaration of conformity